How do I clean seats?

We chose a high traffic adjacent to the playland. We then cleaned the chairs, benches and piping, wood paneling, wall paper, tables and framing.

The first application took one hour and forty-five minutes. The area was monitored and a second application was required in two weeks, which took about forty minutes. Chairs and benches could be done in a sectional program.[/vc_column_text]

How do I remove oil, grease and gum? #

Equipment/solutions:

  •  Signum 1500 or Signum 3000 Vapour Cleaning System
  • Water
  • InterSteam VapourMax

Heavily oil soaked area:

  •  Spray water over area to be cleaned
  • Over heavily soiled area, apply InterSteam VapourMax, 250 ml to 10 sq ft
  • With the large brush accessory of the Signum 1500 or Signum 3000, scrub solutions into soiled area and let sit for 10 minutes
  • Heat the treated area with the Signum 1500 or Signum 3000 at its highest setting, working slowly in small areas to lift the heavy soil out of the cement
  • Wash away the oil and dirt using a hose and water
  • Repeat if necessary

Gum:

  • With small metal brush accessory, apply heat to gum and brush the gum for 5 seconds
  • Spray on Interstearm VapourMax and brush into gum (proceed with other gum while giving solution time to work)
  • Use the small metal brush and high steam setting to remove the gum

[/vc_column_text][/vc_tta_section][vc_tta_section title=”How do I clean calcium and lime?” tab_id=”1462992131597-c040278b-4c86″][vc_column_text]Tools/Solutions:

  • Signum 1500
  • Water
  • InterSteam VapourMate

Heavy build up:

  • Spray concentrated solution of VapourMate over soiled area
  • Agitate with a soft bristled brush
  • Allow solution to sit and work for a period of five minutes
  • Wash away the residue with water
  • Repeat if necessary

Maintenance and lightly soiled areas:

  • Apply lnterstearn VapourMate at a ratio of 1 part to 5 parts water
  • Wash residue away with water

Porous surfaces:

  • Apply Intersteam VapourMate at a ratio of 1 part to 2 parts water
  • With the Vapour machine, and the triangle brush, apply high steam to the affected area
  • Wash with water
  • Repeat if necessary

Note: If applying on metals, ensure solution is fully wash off surface. Should the product be left on for more than 5 minutes, graying may occur. If so, simply use a mild abrasive cloth with water to remove.

Powered by BetterDocs

Scroll to Top